how to use retropie to make a gaming console

#How to use retropie to make a gaming console install#
#How to use retropie to make a gaming console android#
#How to use retropie to make a gaming console download#
#How to use retropie to make a gaming console mac#

Go back to the computer you used to flash the operating system and open the web browser.There will be four sets of numbers, something like 192.168.8.26. It's the very first thing you see in the information box that opens. When it's done, go back to the Desktop list and choose Show IP to find out your RetroPie's IP address (that's the number that identifies it on your Wi-Fi network).Go ahead and reboot now by pressing the Start button to open a control window. Choose it, then pick Enable RetroPie-Manager on boot so that it starts up every time you boot up the Raspberry Pi. When it's done installing, you'll see ** configuration/options** on the list now. This will only take a minute (seriously, just a minute or so).

#How to use retropie to make a gaming console install#

When you see it, go ahead and choose it, then choose to Install from source and let it do its thing. The package we're looking for is called RetroPie-Manager and it's near the very end of the list. They're called Packages because RetroPie is a front-end for Debian Linux and it uses a package manager to add or remove programs. You'll come to a list of applications you can install.

Choose Manage Experimental Packages from the next list.

Choose Manage Packages from the next list.

Go back to the options page and choose RetroPie Setup from the list.

Choose Wi-Fi from the list and enter your Wi-Fi network info when it asks you (use the Tab key on your keyboard to get your cursor in the box).

On the RetroPie Desktop, press the Start button if you don't see a list of things you can do.

That's why we needed it plugged in right away. When it's done you'll see the screen to set up your controller. The first boot might take a couple of minutes because it's setting a few things up. Don't worry, it automatically boots up to an easy graphical interface when it's done. While it's booting you see a bunch of text on a black screen and that's normal. Next, plug the HDMI cable in, then plug the power cord in. You can just grab the one from the computer you used to copy the OS and you're good to go.

Any USB keyboard will work even a wireless one with a little dongle like this cool one from Logitech. If you're using an Ethernet cable with your Pi you don't need a keyboard, but if you're going to use Wi-Fi you need one to enter your Wi-Fi password. When it's done, stick the SD card in the slot on your Raspberry Pi. Don't interrupt it because it will tell you when it's finished. Figure about three to five minutes for a typical PC. It's going to take a few minutes - the bigger the SD card the longer it takes.

Click the button that says Flash! and let it do its thing.

Pick your SD card with the middle button (if it's not showing the right one, click it to change things, then double-check it then triple check it).

Pick the RetroPie image you downloaded and press OK.

Open the Etcher program and click the first button that says Select Image.

Unzip the RetroPie image you downloaded and put it somewhere on your computer.

Write it down if you have to, because we'll need it here in a sec. If you tell Etcher to use the wrong drive, it can erase the stuff on your computer. Open the file explorer on your computer and triple check what drive the SD card you're going to flash is.

#How to use retropie to make a gaming console android#

Source: Android Central (Image credit: Source: Android Central) Plug your SD card into your computer and start flashing. Unless you already have a program you use to flash Raspberry Pi images, trust us.

#How to use retropie to make a gaming console mac#

It's available for Windows, Mac or Linux and it's dead simple to use.

#How to use retropie to make a gaming console download#

The best and easiest way is to download Etcher. You need to do this the right way so your Raspberry Pi can read it from the card and boot up. Now you need a program to flash RetroPie to the SD card. If you bought a different one, you'll find the version printed in white ink right on the top of the circuit board. If you bought the CanaKit, you have a Raspberry Pi 3 B+ so download the image for the 3. Make sure you pick the right file for your Raspberry Pi. On the Downloads page, you'll find a button to download RetroPie for the Raspberry Pi 0 or 1, and a download button for the Raspberry Pi 2 or 3. You don't need to be any sort of tech guru for this.įire up the computer and browse to the RetroPie website. You'll also need a computer running Windows, Mac OS, or Linux to flash the operating system to the card. You need two things from the Internet: the RetroPie operating system, and a utility to create a bootable file system on the SD card you'll be using. If you bought the CanaKit, you have a Raspberry Pi 3 B+. Source: RetroPie (Image credit: Source: RetroPie)